Menvier Security TS2500 Guía de usuario descargar pdf (Pagina 9)

DC54/DC58 Plug-on Digicoms

Aplug-ondigitalcommunicator DC54orDC58 canbe

fitted inside the control panel to allow alarm status

information to be transferred to a dedicated Alarm

Receiving Centre. The unit should be fitted in

accordance with the installation instructions supplied

with it and connected to the control panel plug

DIGI-MODEM(JP7)usingtheleadprovidedwiththeunit.

The NVM within the digicom can be programmed via

the control panel.

DC58M Plug-on Digi-Modem

Aplug-on digi-modem DC58M canbe fitted inside the

control panel to allow remote interrogation and

programming via a personal computer (PC). It will also

function as a standard digicom (if required). The unit

should be fitted in accordance with the installation

instructions supplied with it and connected to the

control panel plug DIGI-MODEM using the lead

provided with the DC58M. The NVM within the

digi-modem can be programmed via the control

panel . The modem data is also programmed via the

control panel.

Output Modules

TheOutputModuleprovideseightswitched-veoutputs

each rated at100mA. They can be used to drive LED's

orrelays etc. Each module is supplied with an interface

lead which allows it to be connected to the control

panel or XNODE. Output modules are normally fitted

inside the equipment they are controlling and can be

positioned up to 100 metres away.

Control Panel Connections

When connected to the control panel the output

modules can be programmed to give ward status

indications and/or circuit mimic/alarm indications.

XNODE Connections

Whenconnectedtothe XNODE,theoutput modulewill

provide circuit mimic indications for the eight

detection circuits of the XNODE.

TS2500

496513 Issue A 9of26 TS2500

Connect to JP7

DIGI-MODEM

Plug-on digicom / digi-modem

B.T. master jack ( Type NTE5

user accessible connections )

White / Blue ring

Blue / White ring

Orange / White ring

Telephone cable

(Type 1/0.5mm CW1308)

Figure 3 DC54/DC58 Connections

DC58M

Telephone

Network

V21.

Modem

Alarm Receiving

Centre

TS2500 Control

Panel

Figure 4 DC58M Digi-modem Schematic

PL1

1k Resistors

LED's

1234

567

+12V IN

+12V OUT

PL2

Connect to plug

labelled OUTPUT

MODULE

100m

Figure 5 Output module Connections

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Comentarios a estos manuales

Sin comentarios

Menvier Security TS2500 Guía de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Menvier Security TS2500