Menvier Security TS2500 Guía de usuario descargar pdf (Pagina 10)

Switch OFF ON

1 XNODE circuits A &

B enabled

Remote keypad 1

circuitsA&Benabled

2 XNODE circuits C &

D enabled

Remote keypad 2

circuitsA&Benabled

3 XNODE circuitsE&F

enabled

Remote keypad 3

circuitsA&Benabled

4 XNODE circuits G &

H enabled

Remote keypad 4

circuitsA&Benabled

☞

Remote keypads cannot be multi-tasked

between each other when connected to the

XNODE, i.e. If remote keypad 1 is in operation,

remotekeypads 2, 3 and 4 are locked-out and

will show “SYSTEM IS BUSY PLEASE WAIT”.

☞

The remote keypads follow the ward

assignment of the XNODE, i.e. If the XNODE is

assigned to ward A then remote keypads 1-4

connected to thatXNODE are also assigned to

ward A.

☞

Theloudspeakerandremotekeypadsounders

will followthewardassignmentoftheXNODE.

☞

The programmable output on the remote

keypads are mapped as follows: Remote

keypads 1 and 3 follow XNODE output A and

remote keypads 2 and 4 follow XNODE output

TS2500

TS2500 10 of 26 496513 Issue A

Data

Network

Control Panel

100 metres 100 metres

100 metres 100 metres 100 metres

1Km(Max.)

Out

XNode XNode XNode XNode XNode

XNode

XNode XNode

I/D=1 I/D=3 I/D=6 I/D=7 I/D=8

I/D=5

I/D=2 I/D=4

Out

XNodeXNode

I/D=10I/D=9

Out

XNode

I/D=11

Out

100 metres

4-Core

100 metres

100 metres 100 metres

1Km

(

Max.

)

Daisy-chained Connections

Star and Daisy-chained Connections

NOTE:

The maximum number of devices

that can be "Star" connected from

the output of the Node or control

panel is 4.

XNodes

5to16

Out

XNode XNode XNode XNode XNode

I/D=1 I/D=2 I/D=3 I/D=4 I/D=16

Out

Data

Network

Control Panel

Figure 6 XNODE Connection Methods

Network Wiring

XNODE Wiring

TheXNODErequiresa4 corecablefor interconnection,

and up to 16 may be connected in a “daisy-chain” or

“star” configuration. The distance between each

XNODE must not exceed 100 metres. The total

distance to last XNODE must not exceed 1000 metres.

Power for detectors is provided by the Aux. +/-

terminals.

Wiring Remote Keypads to an XNODE

Up to four remote keypads can be connectedto each

XNODE, they can be connected in either a “star” or

“daisy-chain” configuration. The distance to the

furthest remote keypad from the XNODE must not

exceed 100 metres. Power for detectors are provided

by the A(+) and B(-) terminals.

The detection circuits in the XNODE can either be

mapped to the XNODE or the the remote keypads by

setting the 4-way “Remote Zone Enable” switch as

shown in the table above:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comentarios a estos manuales

Sin comentarios

Menvier Security TS2500 Guía de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Menvier Security TS2500