Menvier Security TS2500 Guía de usuario descargar pdf (Pagina 4)

Expansion Devices

There are several options for expanding the system:

TS700 LEC

The Local Expansion Card (LEC) provides two

programmable detection circuits and one

programmableswitched-veoutput.Upto5TS700LECs

can be connected on any one network.

TS900 NODE

The TS900 NODE provides eight programmable

detection circuits and two programmable outputs

(one switched +ve and one switched -ve). Up to 5

TS900NODEscanbeconnectedonanyonenetwork.

XNODE

The XNODE provides eight programmable detection

circuits,twoprogrammableoutputs(oneswitched+ve

and one switched -ve) and a loudspeaker output for

driving a 16 Ohm loudspeaker. Each XNODE can also

driveup to4remotekeypads. Up to16XNODEscan be

connected on any one network.

LEC8

The TSLEC8 Local Expansion Card (LEC) is designed to

be fitted inside the control panel it provides 8

programmable detection circuits. The control panel

will accept two LEC8s.

ID NODE

The ID NODE can be used as an alternative to the

standard TS900 NODE. It provides a single ID Detector

Loop for connection to 30 ID devices and 8

programmable outputs. Several options allow it to be

used on its own or with existing TS900 NODEs.

Other Devices

Printer

A DATAC printer or any standard RS232 printer can be

connected to the control panel to obtain system and

log print-outs.

CPA6.OM Output Module

Each output module provides eight switched -ve

outputs, the output modules can be daisy-chained

together to provide multiples of eight outputs. The

outputs can be used to indicate ward status

information and/or circuit alarm/mimic indications.

DC54/58/58M Digicom and Digi-modem

A 4-channel DC54 or 8-channel DC58 digital

communicatorcanbepluggedontothecontrolpanel

to allow alarm status information to be transferred to a

dedicated Alarm Receiving Centre. The 8 channel

DC58M digi-modem can be pluggedonto the control

panel, which functionsas a digital communicator and

V21 modem. The modem facility is required when

using the up/down loading feature.

NIB Networker Interface Board

A driver and receiver board that allows NODEs or

remotes to be driven up to 1 Km.

Technical Specifications

Control Panel

Part No: TS2500

Input Supply: 230V ± 10% 50Hz

Current: 220mA (normal)

300mA (alarm) with speaker

Power Supply: 1.5A

Standby Battery: 2 x 7.0Ah or 1 x 17Ah

Zones 2 to 1040

Panel Outputs: 1 = voltage free changeover

2 = Switched -ve @500mA

3 = Switched +ve @500mA

4 = Switched +ve @500mA

Digi Outputs 1-8: +ve removed

Source 5mA in 12V condition

Sink 100mA in 0V condition

Speaker Output: 16 Ohms

Bell Trigger: Switched -ve @500mA

Strobe Trigger: Switched -ve @500mA

Dimensions: 384(W) x 312(H) x 95(D) mm

Material: 1.2mm mild steel

Weight: 4.9 Kg

Environment: -10° to 55°C

LCD Remote Keypad

Part No: NETLCD

Display: 32 Character Liquid Crystal

Current: 50mA (normal) 60mA (alarm)

Zones: 2

Output: Switched -ve @100mA

Dimensions: 150(W) x 104(H) x 30(D) mm

Material: 3mm Polycarbonate

Weight: 282g

Environment: -10° to 55°C

Starburst Remote Keypad

Part No: NETSTAR

Display: 8 Character Liquid Crystal

Current: 50mA (normal) 60mA (alarm)

Zones: 2

Output: Switched -ve @100mA

Dimensions: 150(W) x 104(H) x 30(D) mm

Material: 3mm Polycarbonate

Weight: 263g

Environment: -10° to 55°C

TS2500 4of26 496513 Issue A

TS2500

1 2 3 4 5 6 7 8 9 ... 25 26

Comentarios a estos manuales

Sin comentarios

Menvier Security TS2500 Guía de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Menvier Security TS2500