Menvier Security TS900+ Manual de usuario descargar pdf (Pagina 51)

Glossary of Terms

Auxiliary Circuit

A detection circuit type which is monitored at all times. When triggered

it will only activate outputs that are programmed as auxiliary.

Chime

An optional facility which allows selected detection circuits to

generate a two-tone "Chime" when triggered.

Central Station

A permanently manned monitoring station used to receive alarm

transmissions via the telephone line from a remote signalling device

such as a digicom.

Detection Circuits

All detection devices, e.g. magnetic contacts, movement sensors,

etc. are connected to detection circuits. Each circuit is allocated a

number which identifies the detection device. For example , a room

protected by a movement sensor may be "Circuit 01", while a door

protected by a magnetic contact may be "Circuit 02".

Digicom

Digital Communicator - A remote signalling device fitted to the system

which will transmit alarm status data via the telephone line to a

dedicated central station.

Downloading

A process which allows the alarm system to be remotely interrogated

and programmed via a computer and modem.

Duress

A means of entering a passcode which generates a silent alarm via

the digicom (if fitted) to a central station.

Exit/Entry route

The route for entering or leaving the protected premises when the

system is being full or part-set.

Final Exit

The door or detector that is used for leaving and entering the premises.

Entry Time

A pre-set time delay to allow the user to enter the protected premises

and reach the remote keypad without causing an alarm.

Event Log

A record of system activity which is stored in a non volatile memory.

Exit Time

A pre-set time delay to allow the user to leave the premises when the

alarm system is being set by the timed exit method.

Exit Terminator

An external push button switch required by some police forces which is

used to set the system after leaving the premises.

Full Set

The state of the alarm system when it is protecting all wards.

Master User

The user(s) who are responsible for assigning new users to the alarm

system.

Modem

A device for transmitting and receiving data to and from a computer

via the telephone line.

Night Circuit

A detection circuit type that will generate a full alarm when the alarm

system is set. When the alarm system is unset the detection circuit may

be triggered without causing an alarm.

Omit

To intentionally exclude the monitoring of one or more detection

circuits when full or part setting the alarm system.

Part-Set

The state of the alarm system when it is protecting part of the premises.

TS790+ & TS900+ User Manual Fault Finding

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57

Comentarios a estos manuales

Sin comentarios

Menvier Security TS900+ Manual de usuario Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Menvier Security TS900+