Menvier Security TSD401 Manual de usuario descargar pdf (Pagina 13)

Menvier Security

Kenn Road Clevedon Avon BS21 6LH

Tel 01275 870078 Fax 01275 343453

E.Mail http//:www.menviersecurity.co.uk

TECHNICAL BULLETIN

No. TS2200/001/12/95

TS2200 CONTROL PANELS

Menvier products have a facility whereby if the user is forced to unset a system under duress, it is possible to

generate a silent alarm which is totally undetectable by the intruder. To generate this "Duress" alarm, simply

unset the system by entering the passcode with the first two digits reversed.

For example, if the system is usually unset with the code 2468, simply enter 4268 to generate a duress alarm.

If it is required to disable this facility for a particular user, simply ensure that the passcode for that user has the

first two digits the same, e.g., 2268. Alternatively, it is possible to disable the duress facility for the entire

system. This can be done using the following sequence:

1. Enter the Engineer's passcode, the display will read "ALTER SYSTEM PROGRAM".

2. Keep pressing

until the display reads "USE DIAGNOSTICS".

3. Press

followed by

and the display will read "ALTER SOFT SWITCHES"

4. Press

and the display will read "SOFT SWITCH 1 <x>" where x will be ON or OFF.

5. Keep pressing

until the display reads "SOFT SWITCH 8 <OFF>"

6. Press

and the display will read "SOFT SWITCH 8 <ON>".

7. Press

followed by

. Keep pressing

until the system returns to the unset condition.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Sin comentarios

Menvier Security TSD401 Manual de usuario Pagina 13