Menvier Security TS700 Manual de usuario descargar pdf (Pagina 5)

4. Part Setting using Part Set Codes

Ensure that all monitored areas are secured. Enter your

passcode, the exit sounder will make a continuous tone. If

required leave via the norma l exit route and close the final exit

door, (pressing the Exit Terminator button if fitted). The system is

part set when the exit sounder stops, the display will al ternate

betweenthe group/areawhich hasbeen armedandthecurrent

time.

5. Setting with Circuits Omitted

It may sometimes be desirable to omit a circuit when full or part

setting the system.

1. Enter your passcode (users 1-9) and press [ within 5

seconds.

2. Press 7 and the display will show the circuit number

followed by i ts omit status. N = not omitted and Y =

omitted.

3. Press0 tochangethestatusofthe circuit and[ to confirm

the change. A low tone will indicate that the circuit cann ot

be omitted or a high pitch multi-tone i ndic ates that the

change has been accepted. Continue with the next circuit

if required.

4. Press] to quitto "user menu1"andcontinue withsetting by

pressing0 for full-setor A or B or C for part-set(see 2 and

3).

6. Silent Setting

The system c an be full set or part set silently except for the final

system set sound. Enter your passcode (users 1-9) and for fullset

press 8 within 5 seconds. For part set press A or B or C then

press 8 .

Alternatively

Enter yo ur passcode (users 1-9) and press [ within 5 seconds.

Press8 and the displaywillshowSIL -.Enter 0 forsilentfullset

or A o r B or C for silent part set.

7. Setting and Unsetting With a Keyswitch

Opera tethekeyswitch (ordoor lo ck) and leave via theexit route.

The syste m will be full set or part set when the exit sounder stops.

To unset the system, operate the keyswitch (or lock) again.

TS700 LED User Operating Instructions

User passcode B entered.

Group/area B will set in 15

seconds.

SET

Group/area B is now armed.

1 -

‘User menu 1’ selecte d.

01-N

Circuit 01 will not be omitted.

01-Y

Press 0 to change the status.

Circuit 01 will now be omitted.

SIL-

Press [0] for silent full set or [A] or

[B] or [C] for si lent part set.

1 -

"User menu 1" selected.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comentarios a estos manuales

Sin comentarios

Menvier Security TS700 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Menvier Security TS700