Menvier Security TS2500 Manual de usuario descargar pdf (Pagina 33)

User Menu 3 Part Set Groups

User menu 3

Select option :-

SYSTEM OPEN

18:10 Sun 01 JAN

User menu 3

Part set groups

PART SET GROUP 0

A...............

2

ENT

ENTENT ENT

? ? ? ?

0 9

to select part set

groups, e.g. [1]

ENT

to edit

PART SET GROUP 1

A,*,*,*,.,.,.,.

1 8

Select/deselect wards

e.g. press [3] to

select ward C

PART SET GROUP 1

A,*,C,*,.,.,.,.

ENT

PART SET GROUP 1

A.C.............

Repeate for other part

set groups

or

SYSTEM OPEN

18:10 Sun 01 JAN

ESC ESC ESC

This option allows you to configure up to 10

part set groups and each group can be

programmed so that it sets any combination

of wards. For example "PART SET GROUP 1 "

could be allocated wards A and C, whereas

"PART SET GROUP 2" could be allocated

wards A and B.

1. At the remote keypad enter your

passcode then press [ENT] three times to

select user menu 3.

2. Press [2] followed by [ENT] to select the

part set groups option.

3. The display will show "PART SET GROUP

0"and the current ward configuration.

4. Press [1] - [9] or [0] to select part set

groups 1 - 9 or 10.

5. When the display shows the required

part-set group, press [ENT] to edit.

6. Press [1] - [8] to select or deselect wards.

Press [A] and [C] to alternate between

wardsA-HandI-P. Press [B] to

select/deselect all wards.

7. When the display shows the required

wards, press [ENT] to accept.

8. Repeat steps4-7for the other part set

groups.

9. Press [ESC] four times to return the system

to its original state.

31

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Comentarios a estos manuales

Sin comentarios